Multimedia filters are otherwise known
as the multi layer filters. The common media layers are normally located at the
top of the tank which can easily trap the small as well as large particles
which can easily captured by the final layer bed. As a result, one can easily
get completely pure and filtering water that is purely contaminant free.
Generally, the depth of the multi-layer filter can easily remove 10 micron size
particles easily at a time. The automatic back washing system easily captures
the trapped contaminant from the water molecule within the filter beds and
drains them out.
 |
| Courtesy: edwininternational.com |
Generally, this multi-media
filter system represents a crucial improvement over the single-media
filters. Primarily, the enhanced filter bed action will completely base on the
innovative selection and use of filter media.
The multi layer filtering option allows delivering the highest quality
of filtered water at a fastest flow rate as compared to the traditional sand
filters. You must know that in the traditional sand filters, finer and lighter
sand particles can easily found at the top of the filter bed and coarser, so
after the backwashing the heavy sand particles remain at the bottom part.
Through this traditional filtration system the filtering process takes place at
the top of the filter bed.
As this multi layer filtering system
has been introduced in the market that can easily and quickly filter by using
the reverse and upwards flow of water through their multi filter beds. The
several layer of this filtering system will retain their satisfaction as each
of the material has its different density.
